750*900*1100
We are now for the first time in years offering this model again. Although This model and Many of our vintage RIDE plates are now sold as a SPECIAL ORDER pre-paid and factory direct only.
Over the years this ZXI Stinger TAIL ride plate has established itself as the #1 handling solution.
Customer Response
Shred Master Customer>
Pat Zuccarini
I put my ZXI Shred Master on last weekend and wow, it's a new machine. I usually ride in Barnegat Bay, NJ. part of the intercostals waterway and most of it is pretty rough on even a normal day. This weekend was particularly rough, 2-3 foot + chop with whitecaps. The perfect test of your company's claims..... With my stock pump cover, these conditions would have been a nightmare, proposing, frightening instability in the trough, hooking turns, slow and dangerous going, you get the picture. The new ride plate completely eliminated proposing, allowing me to double the waves and the thing is so stable now that I can run in water that rough at top speed with confidence. The tail just sticks. On a side note, it is immeasurably less tiring both physically and mentally to ride in the conditions we have to deal with here. I could go on and on, but I'm sure you've heard it all before. I just wanted to drop you a note to say thank you for my new machine!
P.S. I want one for my 650sx, when are they are ready?
Thanks,
Most Important> This ride plate produces a 100% straight high speed tracking line in all water conditions. Specifically needed for once the ZXI leaves the water (boat wake hop, etc) this ride plate commands an imperative straight tracking line, immediately upon water contact (no squirliness or 90 degree unwanted out-of-control hook turn) just hammer down action now! Once on this ZXI Shred Master ride plate, you will immediately know, "You're not firing-off your ZXI rocket without the tail fins"!
Fundamental Improvement, eliminates all porpoising! Hull pitch angle is controlled by a very long tail ride plate, which corrects and maintains the hulls pitch planing angle. The long tail ride plate further assist the increasing "V" bottom surface for faster planing.
Fastest Holeshot on the market, as proven by many boat lengths, time and time again! Ballistic speed right from the start, created by a unique lifting patented "V" bottom design. This allows the ZXI to accelerate faster, quicker holeshots, and more acceleration speed out of the turns. On plane in less than 2’ feet, and faster out of the turn than in.
Imperative Functions, this "V" bottom design eliminates tail sliding and hull drifting turns at all speeds! In addition, "NO" flat sliding before violent aftermarket sponson catch. This is accomplished by 3-point triangulated cutting edge! "V" bottom ride plate design holds the directional line until lean-over sponson catch.
Faster Speeds Due to this ride plates unique lifting effect, created by a transitional increase of the "V" from its front to tail water contact surface. The increasing "V" down pressure on the water allows the ride plate to a degree, to hydroplane the ZXI hull (ride higher out of the water), in turn this reduction of water contact allows for less water resistance to the hull. This patented utility of hydrodynamic design in turn produces faster acceleration and faster overall top speeds for the ZXI.
Rough Water This ride plate's hydrodynamic design which allows the hull to ride higher out of the water, bow slightly up, not pulled down, suppressed, and plowing the water like a tug-boat, further allows for less rough water contact to the hull. In turn a more relaxed ride, no more death grip numb fingers and clamped on bruised inside knees from rough water hull hunting fear. Just a comfortable cutting edge "V" bottom ride, straight as an arrow as needed in rough water.
Testing Conditions This ZXI ride plate was designed and tested in normal water conditions, (8:00am) to rough afternoon chop. And produces an overall flat water 1+mph increase in speed and the rougher the water the faster it will go.
Note: Speed test on this ride plate are conducted by advanced recreational to accredited racers on stock ZXI's, (race boat info is available). Testing is done "ONLY" in normal water riding conditions. "ABSOLUTELY NO" 6:00am mirror glass pond testing here! As we realized 15 years ago, R & D testing must be performed in normal water riding conditions or whoever's testing claims, will do you no good!
MANUFACTURES STATEMENT WITHOUT HESITATION. This is the most multi-functional aftermarket product you can buy for your ZXI, and offered to you at the lowest of aftermarket modification prices. And this ride plate is "absolutely NOT" just another commercial aftermarket knock-off "Pump Cover", that is only marketed by large flashy ads and by offering dealers large profit margins to dump it on you! This Shred Master ride plate is made in the old craftsman's way, it is hundreds of hours of Research & Development time spent to create an original and unique patented custom handcrafted "V" bottom ride plate. That positively will increase the handling characteristics of the your ZXI, in no matter whatever the water conditions! Here you will know that your ZXI has a Shred Master ride plate on it in the first 50 feet!
Shred Master Carving Edge "V" Ride Plate Hand-Crafted in the USA with pride.
If you are not receiving the above button to link to the Shred Master Price Sheet and E-mail Order Form, below is the address to the page: >>> http://www.shred-master.com/feedback.htm
EMAIL> smprp@yahoo.com PHONE> 805-566-9154